• Slim 5 port Industrial Ethernet managed switch with integrated industrial telephone modem
• Easy and secure dial-in and dial-out connections up to 56 Kbps using PPP (point-to-point protocol)
• Easy to configure management and modem functions including PPP, SNMP, VLAN, QoS, IGMP and much more
• Truly rugged design with -40 to 75°C operation

Advanced Hardware Features

• Five Ethernet Ports that are fully IEEE 802.3 compliant
• All 10/100 RJ45 ports are auto-detecting, auto-crossover and auto-polarity
• Integrated industrial telephone modem with dual
  RJ11 modular jacks
• Self-test / alarm output for reporting errors
• Dual redundant power inputs with surge and
  spike protection
• DIN rail or direct panel mounting (no extra kits required)

• Rapid Spanning Tree (RSTP) for fast redundant rings
• SNMPv1 and v2 network management
• SNMPv3 authentication and encryption for security
• SNMP notifications (traps) for report on event
• Priority Queuing (QoS / CoS) for real-time operation
• IGMP for multicast filtering (snooping and querying)
• VLAN for convenient traffic segregation
• Open-source programming for ultimate flexibility
• Broadcast and multicast storm protection
• RMON and port mirroring for advanced diagnostics
• True security with HTTPS, SSL, SSH, SNMPv3 and more
• PPP (Point-to-Point Protocol) for Ethernet to phone links
• RIP (Router Information Protocol)

• Ultra-reliable with 1,000,000+ service-free hours (MTBF)
• Free field-installable upgrades forever
• UL, CSA (CUL), and CE certified
• Hazardous locations rated for Class I, Div. 2 (Zone 2) areas
• Easy to use web interface
  

Ethernet Performance

• Operation: Store and forward wire speed switching, non-blocking
• Mode: Full or half duplex operation with flow control supported on all ports
• MAC Addresses: 2048
• Memory Bandwidth: 3.2 Gbps
• Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
• Ethernet Isolation: 1500 Vrms 1 minute
• Console Port: RS232 (RJ45), Fixed settings:
  9600, 8N1 (9600 Bps, 8 data bits, parity =
  None, stop bits = 1, flow control)

• Maximum Data Rates: 56 Kbps
• Compatibility: V.90, V.34, V.32, V.32 bis,
  V.22, V.22 bis, V.21
• Data Compression: V.42 bis
• Error Correction: V.42 MNP or LAP
• Ringer: 0.3
• Jacks: 2 RJ11 (phone and line)
• Command Sets: Standard AT and S register
• Country Compatibility:  World-wide (100+ countries)
• Telecom Ratings:   FCC Part 68; Industry Canada
  CS03-8; CTR21 (98/482/EC);
  ACA TS 001 and ACA TS 002

• RJ45 Ports: Up to five RJ45 ports that are fully IEEE 802.3 compliant
• RJ45 Speed and Duplex: Configurable or 10/100 auto-detecting for speed and duplex (full or half)
• RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables
• RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs

• Devices Supported: all IEEE 802.3 compliant
  devices are supported
• Protocols: PPP, RIP, SNMPv1/v2/v3, RMON, DHCP, SNTP, TFTP, STP, RSTP, QoS/CoS/ToS/DS, IGMPv1/v2, VLAN (tag and port based), HTTP, HTTPS (SSL and TSL), Telnet, SSH and more
• Industrial Protocols Supported:  Modbus/TCP, EtherNet/IP, PROFInet, Foundation Fieldbus HSE and others
• Standards: IEEE 802.3, 802.3u, 802.3x, 802.1D/w, 802.1p, 802.1Q
• Management Interfaces: Text (Telnetand SSH), CLI (command line interface) and SNMP (see the user manual for supported MIBs)
• Open Source Linux: The Linux Advantage - Contact Sixnet for more info
  

• Power Input: Dual redundant power inputs for redundant power supplies
• Input Voltage Range: 10 to 30 VDC
• Power Consumption: 5 W typical with all ports
  linked and active
• Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 us)
• Self-test/Alarm Output: Same voltage as power input;
  0.5 Amps max.
• PLC/Trigger Input: Voltage 10-30 VDC; typical current input: 6.5 mA @ 24 VDC

• Operating Temperature: -40 to 75°C
  (cold startup at -40°C) 
• Storage Temperature: -40 to 85°C
• Humidity:  5 to 95% RH (non-condensing)
• Vibration: IEC68-2-6
• Shock: IEC68-2-27
• Freefall: IEC68-2-32

• Electrical Safety: UL508 and CSA C22.2/14 per CUL, EN61010-1
• EMC: FCC part 15, ICES-003, EN55022, IEC61326-1, IEEE C37.90
• Hazardous Locations: UL1604, CSA22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15 (Zone 2), ATEX Group II, Cat 3 (Zone 2), EEx nA II T4 X 
• MTBF Mean Time Between Failure: >1,000,000 hours
• RoHS and WEEE RoHS (Pb free) and WEEE compliant
• ISO9001:2008: Certified "Total Quality" company
• Industrial Warranty: 3 years with product registration
  

• Case: Slim line, ideal for DIN rail mounting
• Material: Corrosion-resistant aluminum with
  clear protective coating
• Protection: IP30 protection from dust and debris
• Mounting: DIN-rail or direct-panel (no optional kits or accessories required)
• Dimensions:  5.2" x 2" x 3.82"
  (13.21 cm x 5.08 cm x 9.70 cm)
• Weight: 10 oz (0.28 kg)
• Dimensions (L x W x H): see mechanical drawing
  

This Sixnet-exclusive feature allows you to choose the mounting method that best fits your requirements. This capability is a standard feature so no accessories or optional kits are required!

Vertical snap-on DIN-rail mounting for quickest installation and optimal rail width utilization.	Vertical screw-to-panel mounting for better shock and vibration resistance.
Flat screw-to-panel mounting for low profile orientation in shallow boxes plus best shock and vibration resistance.

• SLX-5MS-MDM Datasheet
• SL-SLX-xxx User Manual
• Managed Switch Software User Manual
• Firmware: Managed Switch v5.0.138
• Firmware: Revision History
• Firmware: Upgrade Guide
• Software Data: SNMB MIB File
• Software: USB Driver
• SLX-5MS-MDM (gif) Drawing
• SLX-5MS-MDM (dxf) Drawing

Ethernet Switches Software & Firmware Downloads

• New Firmware Releases
• Legacy Firmware
• Revision History
• Firmware Loader
• USB Driver
• SNMP MIB File