The EB-5ES-PSE combines the ultra-reliability of a five port EtherTRAK Real-time Switch with four industrial PoE sourcing outputs. Simply power this switch with 48 VDC to source the PoE lines. The four PoE ports automatically sense and support both PoE and non-PoE (traditional) Ethernet devices. Or power this switch with10-30 VDC and it functions as a robust industrial switch that is PoE future-ready.
PRODUCT HIGHLIGHTS
- Four fully IEEE-compliant PoE ports
- Slim packaging fits on your DIN rail
- Plug & play saves you time and money
- Truly industrial rated for any application
IEEE 802.3af COMPLIANT PoE PORTS
- Power Sourcing Equipment (PSE) operation
- Auto-detection of PD (powered devices)
- Over-temperature and over-current detection
- Over and under-voltage detection
- Intelligent message routing - No collisions!
- Supports all standard IEEE 802.3 protocols
- Auto-sensing for speed and duplex
- Auto-mdi/mdix-crossover and auto-polarity
- Automatic PoE power management
- Ultra-reliable 1,000,000+ hours MTBF
- 20-year support and service promise
- Truly industrial -40 to 75°C operation
- Dual power inputs with surge protection
- DIN rail or direct panel mounting
GENERAL
- Operation: Unmanaged, store and forward, wire-speed switching, non-blocking
- Modes: Full or half duplex operation with flow control supported on all ports
- Support: All IEEE 802.3 compliant devices and protocols are supported
- Ethernet compliance
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3 (10Mbps Ethernet for legacy devices)
- IEEE 802.3u (100Mbps Ethernet for newer devices)
- IEEE 802.3x (Full-Duplex with Flow Control)
- MAC addresses: 1024
- Memory bandwidth: 3.2 Gbps
- Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
- Ethernet isolation: 1500 Vrms 1 minute
- RJ45 ports: Up to five RJ45 ports that are fully IEEE 802.3 compliant; four of these are PoE (PSE) and fully
802.3af compliant - RJ45 speed & duplex: 10/100 auto-detecting for speed & duplex (full or half)
- RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables
- RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs
- One optional 100 Mbps fiber optic port for distances
up to 120km - Transceivers: SC or ST style
- Multimode: Links up to 4 km typical; 1310 nm; use with 50 or 62.5/125 um fiber
- Transmitter power (dB): -21 min, -17 typ, -14 max
- Receiver sensitivity (dB): -34 typ, -31 max
- Singlemode: Links up to 20 km typical; 1310 nm; use with 9 or 10/125 um fiber
- Transmitter power (dB): -15 min, -11 typ, -8 max
- Receiver sensitivity (dB): -36 typ, -31 max
- Singlemode LongHaul: Links up to 40 km typical; 1310 nm; use with 9 or 10/125 um fiber
- Transmitter power (dB): -5 min, -3 typ, -0 max
(special order) - Receiver sensitivity (dB): -36 typ, -34 max
(special order)
- Transmitter power (dB): -5 min, -3 typ, -0 max
- Longer distances: Contact SIXNET for distances up to 120 km
- Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10
and 1040.11
- Redundancy: Dual power input terminals with reverse polarity protection
- Power input: 10-30 VDC with no PoE output; 45-56 VDC for PoE output
- Switch Power Consumption
- 2.0 W (5-port without fiber) + PoE
- 3.0 W (5-port with 1 fiber) + PoE
- Typical for all ports to be active at 100 Mbps
- PoE Power consumption: Up to 15.4 W per port
- Transient protection: 15,000 watts peak
- Spike protection: 5,000 watts (10 times for 10 uS)
- PoE compliance: 100% IEEE 802.3af compliant
- PoE classification: PSE (Power Sourcing Equipment)
- PoE voltage: 45 to 48 VDC depending on power input
- PoE power: Up to 15.4 watts per channel
- PoE RJ45: pin assignments TX/V- (3, 6); RX/V+ (1, 2)
- PoE operation: automatic detection and
power management - PoE disconnect mode: DC disconnect
- PoE protection: over-temperature, over-current, over/under-voltage and transient
- Operating temperature: -40 to 75°C (cold startup @ -40)
- Storage temperature: -40 to 85°C
- Humidity: 5 to 95% RH (non-condensing)
- Vibration: IEC68-2-6
- Shock: IEC68-2-27
- Freefall: IEC68-2-32
- Electrical safety: UL508 / CSA C22.2/14 per CUL; EN61010-1
- EMC: FCC part 15 / ICES-003; EN55022 / IEC61326-1
- Hazardous locations: UL1604, CSA C22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); ATEX / Cenelec (Zone 2)
- MTBF Mean Time Between Failure: >1,000,000 hours
- RoHS and WEEE: RoHS (Pb free) and WEEE compliant
- ISO9001:2000: Certified "Total Quality" company
- Industrial Warranty: 3 years with product registration
- Slim line case, ideal for DIN rail mounting
- Material: Corrosion-proof polycarbonate plastic
- Protection: IP30 protection from dust and debris
- DIN rail mounting or direct to panel (no optional kits or accessories required)
- Dimensions: 1.0" x 4" x 3.3" (2.5 x 10.0 x 8.3 cm)
- Weight: 4 oz. (0.11 kg)
| PRODUCT NUMBER |
DESCRIPTION |
| EB-5ES-PSE-1 |
Industrial Ethernet switch with 4 PoE and 1 RJ45 uplink |
| EB-5ES-PSE-2SC |
(Special Order) with 1 multimode SC for links up to 4 km |
| EB-5ES-PSE-2ST |
(Special Order) with 1 multimode ST for links up to 4 km |
| EB-5ES-PSE-3SC |
(Special Order) with 1 singlemode SC for links up to 20 km |
| EB-5ES-PSE-3ST |
(Special Order) with 1 singlemode ST for links up to 20 km |
| EB-5ES-PSE-3SCL |
(Special Order) with 1 singlemode long haul SC for links up to 40 km |
| EB-5ES-PSE-3STL |
(Special Order) with 1 singlemode long haul ST for links up to 40 km |
MODELS
 |
|
| EB-5ES-PSE-1 5 RJ45 Ports |
|
 |
 |
| EB-5ES-PSE-2SC or -3SC 4 RJ45 & 1 Fiber (SC Style) |
EB-5ES-PSE-2ST or -3ST 4 RJ45 & 1 Fiber (ST Style) |
