Just add your own packaging, power supply and connectors and you have your own custom industrial Ethernet switch.
-
Fast wire-speed switching
-
Intelligent message routing - No collisions!
-
Real-time Ring® and Rapid Spanning Tree (RSTP) for fast redundant ring or mesh connections
-
SNMPv1 and v2 network management
-
SNMPv3 authentication & encryption for security
-
SNMP notifications (traps) for report on event
-
Priority Queuing (QoS/CoS) for real-time operation
-
IGMP for Multicast filtering (snooping & querying)
-
VLAN for convenient traffic segregation
-
Broadcast & multicast storm protection
-
RMON & port mirroring for advanced diagnostics
-
Security with HTTPS, SSL, SSH, SNMPv3 & more
-
Easy to use interfaces: web, CLI or Telnet
-
Free firmware upgrades forever
-
Ultra-reliable 1,000,000+ hours MTBF
-
UL/CSA (CUL), CE and hazardous locations (Zone 2) rated
-
-40 to 75°C operating range
-
Self-test / alarm output signal
ETHERNET PERFORMANCE
-
Fully managed with 6 Ethernet ports
-
Store & forward, wire-speed switching
-
Automatic address learning, aging and migration
-
Full duplex operation with flow control (no collisions)
-
All IEEE 802.3 Ethernet protocols supported
-
2048 MAC addresses supported
-
Memory bandwidth: 3.2 Gbps
-
Typical latency (varies on load)
-
@ 100 Mbps: 5 µs + frame time
-
@ 10 Mbps: 16 µs + frame time
-
-
Ethernet isolation: 1500 VRMS 1 minute
-
6 fast (10/100) Ethernet ports total
-
4 with on-board PHYs and magnetics; these are available through board-to-board or ribbon connector
-
1 with on board PHY (by requires external magnetics); available through board-to-board connector
-
1 is an MII port for interface to an external CPU or PHY or fiber optic transceiver; available through board-to-board connector
-
-
Ports support plug and play operation
-
Auto-negotiation for 10 or 100 Mbps
-
Auto- MDI/MDIX-crossover for any either cable type
-
Auto-polarity corrects for crossed +/- signals
-
-
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
-
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
-
IEEE 802.3x (Full-Duplex with Flow Control)
-
IEEE 802.1D/w, 802.1p, 802.1Q and much more
-
Power input voltage: 3.3 VDC (regulated)
-
Input power (typical - all ports active at 100 Mbps):
-
<1.65 W (<500 mA @ 3.3 VDC)
-
-
Operating temperature: -40 to +75°C (cold startup at -40)
with proper heak-sinking -
Storage temperature: -40 to +85 °C
-
Humidity: (non-condensing) 5 to 95% RH
-
Vibration and shock: IEC68-2-6, -2-27 and -2-32
with proper mounting
-
Electrical safety: UL508/CSA C22/14, EN61010-1, CE
-
EMC: FCC part 15, ICES-003, EN55022, EN610006-2/4, CE
-
Hazardous Locations: UL1604/CSA C22.2/213 (Class I, Division 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
-
RoHS and WEEE compliant
-
ISO9001:2000 certified company
| PART NUMBER | DESCRIPTION |
| ET-5MS-OEM-2-1 |
OEM switch with only Molex connectors*
(for board-to-board and ribbon interfaces) |
| ET-5MS-OEM-2-1B** |
OEM switch with Samtec connectors
(2 for board-to-board connections) plus
Molex ribbon interface* |