CONTACT US

PRODUCTS



8 Port Gigabit Managed Switch

SLX-8MG-1

The SLX-8MG-1 is an 8 port “all-Gigabit” industrial Ethernet managed switch that is designed to be rugged, reliable, real-time and secure. It combines compact DIN-rail packaging, protected circuitry and powerful software to keep your system going even in the toughest conditions.


8%20Port%20Gigabit%20Managed%20Switch

Click to Enlarge

 

Product Highlights

  • 8 Gigabit ports for 10/100/1000 Ethernet links
  • 4 advanced combination ports accept copper RJ45 or noise-immune fiber optic links up to 100+ km
  • Fully managed with advanced features and security
  • Flexible DIN-rail or direct-panel mounting
  • Truly rugged design for -40 to +75°C operation

Four Flexible Combination Gigabit Ports
Your choice – just connect to the RJ45 for a 10/100/1000 Mbps auto-detecting copper link or plug in a fiber transceiver for a 100 or 1000Mbps noise-immune fiber link. These advanced ports give you the flexibility you need and make your job easier!


Real-Time Secure Performance
  • Rapid Spanning Tree (RSTP) and Real-Time-Ring™
    for fast redundant ring or mesh networks
  • SNMPv1 and v2 network management
  • SNMPv3 authentication and encryption for security
  • SNMP notifications (traps) for report on event
  • Priority Queuing (QoS/CoS) for real-time operation
  • IGMP for Multicast filtering (snooping and querying)
  • VLAN for convenient traffic segregation
  • Broadcast and multicast storm protection
  • RMON and port mirroring for advanced diagnostics
  • Security with HTTPS, SSL, SSH, SNMPv3 and more
  • Easy configuration via Web, Telnet or CLI
  • Free firmware upgrades forever

Industrial Design
  • UL/CSA (CUL), CE, Hazardous Locations (Zone 2) and Maritime rated
  • Ultra-reliable with 1,000,000+ service-free hours (MTBF)
  • Wide temperature operation -40 to 75°C - No fans!
  • Dual (redundant) power inputs with spike protection
  • Self-test and alarm output contact
  • Rugged corrosion-resistant aluminum packaging
  • DIN-rail or direct-panel mounting in multiple positions

Ethernet Performance
  • Operation: Store and forward, wire-speed switching, non-blocking
  • Modes: Full or half duplex operation
    with flow control supported on all ports
  • MAC addresses: 8192
  • Memory bandwidth: 32 Gbps
  • Latency (typical): < 5 us plus frame time
  • Ethernet isolation: 1500 Vrms 1 minute
  • Console ports: USB and RS232 (RJ45)

Ethernet Ports
  • RJ45 ports: Eight RJ45 ports that are fully IEEE 802.3 compliant
  • RJ45 speed and duplex: Configurable or 10/100/100 auto-detecting
    for speed and duplex (full or half)
  • RJ45 MDI / MDIX: Auto-mdi / mdix-crossover automatically supports
    either straight or crossed cables
  • RJ45 Polarity: Auto-polarity for automatic correction of
    crossed TXD and RXD pairs
  • Four ports are combination Gigabit ports that have both a RJ45 connector and SFP cage. For each of these ports only one connector can be used at a time.
  • SFP (pluggable) ports accept Mini-GBIC (SFP) transceivers with a speed of 1000Mbps or 100Mbps
  • See separate datasheet for optional fiber transceiver specifications
  • Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11

Networking & Management 
  • Devices supported: All IEEE 802.3 compliant devices are supported
  • Protocols: SNMPv1 / v2 / v3, RMON, DHCP, SNTP, TFTP, STP, RSTP, QoS / CoS / ToS / DS, IGMPv1 / v2, VLAN (tag and port based), HTTP, HTTPS (SSL and TSL), Telnet, SSH and more
  • Industrial protocols supported: Modbus / TCP, EtherNet / IP, PROFInet, Foundation Fieldbus HSE and others
  • Standards: IEEE 802.3, 802.3u, 802.3x, 802.1D / w, 802.1p, 802.1Q, 802.3ab/z
  • Management interfaces: Text (Telnet and SSH), CLI (command line interface) and SNMP (see the user manual  for supported MIBs)

Power & Alarm Output 
  • Dual redundant power inputs for redundant power supplies
  • Input voltage range: 10 to 30 VDC
  • Power consumption: Typical with all ports linked and active
    • 12 W (with no fiber transceivers)
    • 15 W (with four fiber transceivers)
  • Industrial surge and spike protection:
    • 15 kW peak, 5 kW (10 times for 10 us)
  • Self-test/alarm output:
    • Same voltage as power input
    • 0.5 Amps max. 

Environmental
  • Operating temperature: -40 to 75°C (cold startup at -40°C)
  • Storage temperature: -40 to 85°C
  • Humidity: 5 to 95% RH (non-condensing)
    (conformal coating is an available option - contact Sixnet)
  • Vibration and shock: IEC60068-2-6, -27 and -32

Standards & Compliance
  • Electrical safety: UL508, CSA C22.2/14; EN61010-1, CE 
  • EMC: FCC part 15, ICES-003; EN55022, EN61000-6-2/4, CE 
  • Hazardous locations: UL1604, CSA22.2/213 (Class I, Div. 2);
    EN60079-15 (Zone 2, Category 3) , CE (ATEX)
  • Marine and offshore rated per ABS
  • RoHS and WEEE compliant
  • ISO9001:2008 certified company

Mechanical 
  • Case: Corrosion-resistant aluminum 
  • Protection: IP30 protection from dust and debris
  • DIN-rail or direct-panel mounting
    (no optional kits or accessories required)
  • Dimensions: 2.50" x 5.20" x 3.82" (6.35 x 13.21 x 9.70 cm)
  • Weight:12 oz. (0.34 kg)

Specifications are subject to change. Contact Sixnet to learn more.

This Sixnet-exclusive feature allows you to choose the mounting method that best fits your requirements. This capability is a standard feature so no accessories or optional kits are required!

3 way mounting

Vertical snap-on DIN-rail
mounting for quickest installation
and optimal rail width utilization.
3 way mounting

Vertical screw-to-panel
mounting for better shock
and vibration resistance.
3 way mount

Flat screw-to-panel mounting for low profile
orientation in shallow boxes plus best shock
and vibration resistance.

Model Description
SLX-8MG-1 8 Gigabit RJ45 including 4 combo SFP
GMFIBER-SFP-500 Gigabit SFP fiber transceiver, mm, 550 m
GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km
GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km
GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km
GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km
GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km
FMFIBER-SFP-4K 100Mb SFP fiber transceiver, mm, 4 km
FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km
FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 km
FSFIBER-SFP-100 100Mb SFP fiber transceiver, sm, 100 km
Note: Special (such as Bi-Di) or extra long haul (up to 120 km) are available special order.


Accessories
Model Description
ET-PS-024-02 Power supply – AC to 24VDC, 2A
RJ45-DB9F-CBL Console port cable, DB9 to RJ45

Ethernet Switches Software & Firmware Downloads

  • New Firmware Releases
  • Legacy Firmware
  • Revision History
  • Firmware Loader
  • USB Driver
  • SNMP MIB File

© 2010 Sixnet. All Rights Reserved.
Home | Solutions | Products | Ordering | Support | News & Events | Partners | Company | Privacy | Translate Sixnet | Contact Us