SIXNET :: Solutions for today's industrial networking challenges

• Four 100 Mbps fiber optic ports for noise immune
  links up to 120 km
• Slim packaging fits on your din rail
• High performance and value
• Truly industrial hardened design
• Advanced features and security

ADVANCED HARDWARE FEATURES

• Eight Ethernet Ports that are fully IEEE 802.3 compliant
• All 10/100 RJ45 ports are auto-detecting, auto-crossover and auto-polarity
• Up to four 100Mbps fiber optic ports for
  distances up to 120km
• Self-test / alarm output for reporting errors
• Dual redundant power inputs with surge
  and spike protection
• DIN rail or direct panel mounting (no extra kits required)

• Rapid Spanning Tree (RSTP) for fast redundant rings
• SNMPv1 and v2 network management
• SNMPv3 authentication & encryption for security
• SNMP notifications (traps) for report on event
• Priority Queuing (QoS/CoS) for real-time operation
• IGMP for Multicast filtering (snooping & querying)
• VLAN for convenient traffic segregation
• Open-source programming for ultimate flexibility
• Broadcast & multicast storm protection
• RMON & port mirroring for advanced diagnostics
• True security with HTTPS, SSL, SSH, SNMPv3 & more

• Ultra-reliable with 1,000,000+ service-free hours (MTBF)
• Free field-installable upgrades forever
• UL, CSA (CUL), & CE certified
• Hazardous locations rated for Class 1, Div. 2
  (Zone 2) area
• Rugged corrosion-resistant aluminum packaging
• Wide temperature operation -40 to 75°C (SLX models)

• Operation: Store and forward wire speed switching, non-blocking
• Modes: Full or half duplex operation with flow control supported on all ports
• MAC Addresses: 2048
• Memory Bandwidth: 3.2 Gbps
• Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
• Ethernet isolation: 1500 Vrms 1 minute
• Console Port(s): RS232 (RJ45), fixed settings: 9600, 8N1 (9600 Bps, 8 data bits, parity = None, stop bits = 1, flow control) or USB (on newer models)

• RJ45 ports: Up to eight RJ45 ports that are fully IEEE 802.3 compliant
• RJ45 speed & duplex: Configurable or 10/100 auto-detecting for speed & duplex (full or half)
• RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables
• RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs

• Fiber optic ports up to four 100 Mbps fiber optic ports for distances up to 120km
• Transceivers: SC or ST style
• Multimode: Links up to 4 km typical; 1310 nm; use with 50-62.5/125 um fiber
  • Transmitter power (dB): -19 min, -17 typ, -14 max
  • Receiver sensitivity (dB): -34 typ, -32 max 
• Singlemode: Links up to 20 km typical; 1310 nm; use with 9/125 um fiber
  • Transmitter power (dB): -15 min, -11 typ, -7 max
  • Receiver sensitivity (dB): -34 typ, -31 max 
• Singlemode LongHaul: Links up to 40 km typical; 1310 nm; use with 9/125 um fiber
  • Transmitter power (dB): -5 min, -3 typ, -0 max
    (special order)
  • Receiver sensitivity (dB): -36 typ, -34 max
    (special order)
• Longer distances and special transceivers: Contact SIXNET for special fiber optic transceivers (such as Bi-di), mixed types (mm & sm, SC & ST, etc.) on the same switch, or long haul with distances up to 120 km.
• Eye safety: IEC60825-1, class 1; FDA 21 CFR 1040.10 and 1040.11

• Devices support: All IEEE 802.3 compliant devices
  are supported
• Protocols: SNMPv1/v2/v3, RMON, DHCP, SNTP, TFTP, STP, RSTP, QoS/CoS/ToS/DS, IGMPv1/v2, VLAN (tag and port based), HTTP, HTTPS (SSL & TSL), Telnet, SSH and more
• Industrial protocols supported: Modbus/TCP, EtherNet/IP, PROFInet, Foundation Fieldbus HSE and others
• Standards: IEEE 802.3, 802.3u, 802.3x, 802.1D/w, 802.1p, 802.1Q
• Management interfaces: Text (Telnet & SSH), CLI (command line interface) and SNMP (see the user manual  for supported MIBs)
• Open Source Linux: The Linux Advantage - contact SIXNET for more information

• Power input: Dual redundant power inputs for redundant power supplies
• Input voltage range: 10 to 30 VDC
• Power Consumption: Typical with all ports
  linked and active
  •  4.3 W (SL-8MS-1 with all copper ports)
  •  6.3 W (SL-8MS-4/5 with 2 fiber ports)
  •  9.0 W (SL-8MS-8/9 with 4 fiber ports)
• Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 us)
• Self-test / alarm output: Same voltage as power input; 0.5 Amps max.

• Operating temperature
  • -10 to 60°C for SL models
  • -40 to 75°C for SLX models (cold startup at -40°C)
• Storage temperature: -40 to 85°C
• Humidity: 5 to 95% RH (non-condensing);(conformal coating is an available option - contact SIXNET)
• Vibration: IEC68-2-6
• Shock: IEC68-2-27
• Freefall: IEC68-2-32

• CE: Meets all applicable directives
• Electrical safety: UL508 & CSA C22.2/14 per CUL, EN61010-1
• EMC: FCC part 15, ICES-003, EN55022, IEC61326-1
• Hazardous locations UL1604, CSA22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15(Zone 2) , ATEX Group II, Cat 3 (Zone 2), EEx nA II T4 X
• RoHS and WEEE: RoHS (Pb free) and WEEE compliant
• ISO9001:2000: Certified "Total Quality" company
• Industrial warranty: 3 years with product registration

• Slim line case, ideal for DIN rail mounting
• Material: Corrosion-resistant aluminum with clear protective coating
• Protection: IP30 protection from dust and debris
• DIN rail mounting or direct to panel (no optional kits or accessories required)
• Dimensions: 1.60" x 5.20" x 3.82"
  (4.06 x 13.21 x 9.70 cm)
• Weight:  
  • SL/SLX-8MS-1/4/5: 10 oz. (0.28 kg)
  • SL/SLX-8MS-8/9: 11 oz. (0.31 kg) 
    

This SIXNET-exclusive feature allows you to choose the mounting method that best fits your requirements. This capability is a standard feature so no accessories or optional kits required!

Vertical snap-on DIN rail mounting for quickest installation and optimal rail width utilization	Vertical screw-to-panel mounting for better shock and vibration resistance
Flat screw- to-panel mounting for low profile orientation in shallow boxes plus best shock and vibration resistance.