SIXNET :: Solutions for today's industrial networking challenges

• 8 fast Ethernet ports for 10/100 Mbps links
• High performance switch rated for MIL-STD-810F, MIL-STD-461E and MIL-STD-1275B
• IP67 / NEMA 6 rated package totally protects against dust, water, oil, debris and more
• Military-rated MIL-DTL-38999 Series III connectors protect against vibration, shock, water and more
• Tough corrosion-proof aluminum enclosure
• Truly industrial -40 to +75°C operating range with conductive cooling (no moving parts)

• Unmanaged or fully managed models available
• Fast wire-speed switching with automatic intelligent routing for no collisions and no delays!
• Each port supports auto-speed/duplex, auto-crossover and auto-polarity
• Managed models support advanced features such as RSTP, SNMP, QoS/CoS, IGMP, VLAN, security and much more

• Direct-mounting saves money eliminating the need for additional enclosures, wiring and fittings
• IP67 (NEMA6) water-tight case enables mounting into a vehicle or an exposed wall in harsh applications
• Flat or on-edge mounting so MIL connectors are conveniently on the side allowing for a more direct (less bends) and protected routing of your MIL cables

• Direct 10-30 VDC power input with MIL-STD-1275B military spike and surge protection
• Over 1,000,000 hours (MTBF) of trouble free service (estimation based on actual return and repair data)
• SIXNET exclusive 20 year support and service policy
• Hazardous locations rated for Class I,
  Division 2 (Zone 2) areas

• 8 fast Ethernet ports for 10/100 Mbps links
• Store & forward wire-speed non-blocking switching
• Managed or unmanaged model available
• All IEEE802.3 Ethernet protocols supported
• Auto-negotiation for Ethernet speed and duplex
• Auto-crossover for Ethernet MDI/MDIX wiring
• Auto-polarity for Ethernet TD and RD polarity
• Full or half duplex operation (auto or configurable)
• 2048 MAC addresses supported
• 3.2 Gbps Memory bandwidth
• Ethernet isolation 1500 VRMS 1 minute
• Connector: MIL-STD-38999 series III receptacle with shell size A, style 35, 6 socket contacts & N keying

• IEEE 802.3 (10Mbps Ethernet supports legacy devices)
• IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
• IEEE 802.3x (Full-Duplex with Flow Control)..and many more

• Connector: MIL-STD-38999 Series III receptacle with shell size A, style 98, 3 pin contacts and A keying
• Input voltage range: 10-30 VDC (continuous)
• Input power: 4 W (typical under full load)
• Reverse polarity protection
• Exceeds MIL-STD-1275 for power protection
• Military surge protection: 100 volts for 1 second
• Transient protection: 15,000 watts peak
• Spike protection: 5,000 watts (10x for 10 uS) or  250 volts (50x for 100 uS)

• Operating temperature: -40 to +75°C
  (cold start up at -40°C)
• Storage temperature: -40 to +85 °C
• Humidity (non-condensing) 5 to 95% RH
• Vibration, shock and freefall per MIL-STD-810F and IEC68-2-6, -27 and -32
• Vent plug for high altitude operation

• Dimensions (L x W x H): 10.5 x 4 x 2.45”
  (267 x 102 x 62mm)
• Weight (including caps): 2.20 lbs (1 Kg)
• IP67 dust, oil and water-tight package protection
• Connectors and caps: olive-drab-green cadmium
• Case: olive-drab-green plating

• MIL-STD-461E for EMC performance
• MIL-STD-810F for environmental performance
• MIL-STD-1275B for power protection
• FCC part 15 / ICES-003; EN55022 ; IEC61326-1
• UL508/CSA C22.2/14 for electrical safety
• UL1604/CSA C22.2/213 for hazardous locations
• EN60079-15 (Zone 2) for hazardous locations

• USB / RS232 console port via MIL-STD-38999 series III connector w/ shell size A, style 35, 6 contacts & A keying
• Rapid Spanning Tree (RSTP) for fault-tolerant loops
• Priority queuing for real-time performance
• SNMP v1 and V2 for network management
• SNMP v3 for authentication and encryption
• SNMP notifications (traps) for report on event
• IGMP v1 & v2 for IP multicast filtering
• VLAN (port & tag based) for traffic segregation
• Message filtering to stop broadcast/multicast storms
• RMON and port mirroring for diagnostics
• Configuration via secure (https) Web interface, Telnet / SSH (network), terminal (RS232) or SNMP (v1, v2, v3)
• And much more (Contact us for latest features list)

• Ethernet Plug – D38999/26WA35PN
• Power Plug – D38999/26WA98SA
• USB/RS232 Plug –  D38999/26WA35PA

All specifications are subject to change. Consult factory for latest info.

• These switches feature MIL-STD-38999 Series III connectors for military and severe environment applications.
• 22D Contacts – Tested and proven for high speed signals such as 100Mbps Ethernet
• EMI Shielding and ESD Resistance - Solid metal to metal coupling provides superior EMI shielding and ESD protection
• Contact Protection - Recessed pins in this 100% scoop-proof connector minimize contact damage
• Moisture Corrosion Resistance - Shells are cadmium over nickel to withstand a 500 hour salt spray exposure
• Resistance - Improved interfacial seal helps prevent electrolytic erosion of contacts
• Vibration/Shock - Operates under severe high temperature with vibration, through 200°C
• Lockwiring Eliminated - Unique, self-locking, quick coupling connector eliminates lockwiring
• Quick Coupling - Completely mates and self-locks in a 360° turn of the coupling nut
• Compact Size – Ultra compact size to fit into the tightest applications