9 ports including 3 gigabit portsThe ET-9RG is a 9 port industrial Ethernet Real-time Ring™ switch that provides super-fast, fault-tolerant network redundancy using rings to ensure your critical real-time system stays running. The Real-time rings self-configure and work right out of the box, without the need for complex configuration steps making them truly plug and play. The ET-9RG is also designed to be rugged and ultra-reliable. The ruggedness comes from its wide operating temperature range, industrial ratings (UL, CE, marine, hazloc, etc.) plus SIXNET’s 25+ years of expertise in designing truly industrial rated products. The reliability is field proven with over 1,000,000 service-free hours (MTBF) based on real-world data of thousands of switches currently in the field. SIXNET industrial Ethernet switches are the toughest and most reliable with a unique 20-year support and service promise!
PRODUCT HIGHLIGHTS
- Truly rugged design with -40 to 85°C operation
- Pre-configured for plug and play simplicity
- Link loss recovery of 30 mS + 5 mS per hop!
- Compact, low-profile packaging that fits in
tight spaces and shallow enclosures
ADVANCED HARDWARE FEATURES
- Nine Ethernet Ports that are fully IEEE 802.3 compliant
- Six 10/100 RJ45 ports that are auto-detecting, auto-crossover and auto-polarity
- Up to three 10/100/1000 RJ45 ports that are auto-detecting, auto-crossover and auto-polarity
- Up to two 1000 Mbps fiber optic ports for
distances up to 80 km
- Self-test / alarm output for reporting errors
- Dual redundant power inputs with industrial
surge and spike protection - DIN rail or direct panel mounting
(no extra kits required)
- Real-time Ring™ for ultra-fast fault-tolerant loops
- Link loss recovery of 30 mS + 5 mS per hop!
- Priority Queuing (QoS/CoS) for real-time operation
- Modbus over Ethernet monitoring - use Modbus to monitor power and ring status
- Free and easy to use Windows configuration utility (Optional: only needed for advanced operation; the switch and rings are plug & play and work right out of the box!)
- Message filtering to prevent broadcast storms
- Store and forward wire speed switching - no delays!
- Ultra-reliable with 1,000,000+ service-free hours (MTBF)
- Free field-installable upgrades forever
- Unique 20-year support and service policy
- Industrial -40 to +85°C operating range
- UL, CSA (CUL), & CE certified
- DNV marine & offshore rated
- Hazardous locations rated for Class I, Div. 2
(Zone 2) areas
GENERAL
- Operation: Store and forward wire speed switching, non-blocking
- Modes: Full or half duplex operation with flow control supported on all ports
- Memory Bandwidth: 32 Gbps
- Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
- Ethernet Isolation: 1500 Vrms 1 minute
- RJ45 Ports: Up to nine RJ45 ports that are fully IEEE 802.3 compliant
- RJ45 Speed & Duplex: Configurable or auto-detecting for speed & duplex (full or half), ports 1-6 are 10/100, port 7 and optionally 8 & 9 are 10/100/1000
- RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables
- RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs
- Fiber Optic Ports: Up to two 1000 Mbps fiber optic ports for distances up to 80 km>
- Transceivers: SFP (mini-gbic pluggable) with LC style connectors
- Multimode: Links up to 550 m typical; 850 nm; use with 50-62.5/125 um fiber
Standard "M" option
- Transmitter power (dB): -9 min, -3 max
- Receiver sensitivity (dB): -18 max
Special Order
- Transmitter power (dB): -9 min, -3 max
- Receiver sensitivity (dB): -20 max
Standard "S" option
- Transmitter power (dB): -9 min, -3 max
- Receiver sensitivity (dB): -20 max
Special Order
- Transmitter power (dB): -4 min, -2 max
- Receiver sensitivity (dB): -23 max
Special Order
- Transmitter power (dB): -4 min, -2 max
- Receiver sensitivity (dB): -23 max
Special Order
- Transmitter power (dB): 0 min, +5 max
- Receiver sensitivity (dB): -23 max
Eye safety - IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
NETWORKING FEATURES
- Devices Supported: All IEEE 802.3 compliant devices are supported
- Protocols & Features: All IEEE 803.2, Real-time Ring™, QoS/CoS/ToS/DS, port mirroring, broadcast storm protection, Modbus monitoring
- Real-time Ring™: Maximum recommended switches in a ring: 50 for best performance but more is possible
- Dual ring support: Yes
- Link loss recovery time: 30 mS plus 5 mS per hop
- Industrial Protocols Supported: Modbus/TCP, EtherNet/IP, PROFInet, Foundation Fieldbus HSE and others
- Standards: IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3z
- Management Interfaces: Free Windows configuration utility (only needed to configure advanced capabilities such as QoS, port mirrioring, Modbus monitoring
- Power Input: Dual redundant power inputs for redundant power supplies
- Input Voltage Range: 10 to 30 VDC
- Power Consumption: 8.0 W typical with all ports linked and active
- Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 us)
- Self-test / Alarm Output: Same voltage as power input; 0.5 Amps max.
- Operating Temperature: -40 to 85°C (cold startup at -40°C)
- Storage Temperature: -40 to 85°C
- Humidity: 5 to 95% RH (non-condensing)
- Vibration: IEC68-2-6
- Shock: IEC68-2-27
- Freefall: IEC68-2-32
- Electrical Safety: UL508 & CSA C22.2/14 per CUL, EN61010-1
- EMC: FCC part 15, ICES-003, EN55022, IEC61326-1
- Hazardous Locations: UL1604, CSA22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15 (Zone 2), ATEX Group II, Cat 3 (Zone 2), EEx nA II T4 X
- Marine and Off-shore: DNV (Det Norske Veritas) No. 2.4
- MTBF: Mean Time Between Failure: >1,000,000 hours
- RoHS and WEEE: RoHS (Pb free) and WEEE compliant
- ISO9001:2000: Certified "Total Quality" company
- Industrial Warranty: 3 years with product registration
- Case: Low profile, ideal for shallow enclosures and tight spaces
- Material: Rust-proof Lexan and aluminum with clear protective coating
- Protection: IP30 protection from dust and debris
- Mounting: DIN rail or direct to panel (no optional kits or accessories required)
- Dimensions: 3.8" x 6.25" x 2.3" (9.6 cm x 15.9 cm x 5.8 cm)
- Weight : 12 oz. (0.34 kg)
| PART NUMBER | 10/100 RJ45 |
Gigabit RJ45 |
DESCRIPTION FIBER PORTS |
| ET-9RG-1-D1 | 6 | 3 | - |
| ET-9RG-CM-D1 | 6 |
2 |
1 mm gigabit fiber transceivers - up to 550 m typ. |
| ET-9RG-MX-D1 | 6 | 1 | 1 mm gigabit fiber transceivers - up to 550 m typ. |
| ET-9RG-MM-D1 | 6 | 1 | 2 mm gigabit fiber transceivers - up to 550 m typ. |
| ET-9RG-CS-D1 | 6 | 2 | 1 sm gigabit fiber transceivers - up to 10 km typ. |
| ET-9RG-SX-D1 | 6 | 1 | 1 sm gigabit fiber transceivers - up to 10 km typ. |
| ET-9RG-SS-D1 | 6 | 1 | 2 sm gigabit fiber transceivers - up to 10 km typ. |
MODELS
 |
|
| ET-9RG-1 Six 10/100 RJ45 Ports Three 10/100/1000 RJ45 Ports |
|
 |
 |
| ET-9RG-MM Six 10/100 RJ45 Ports One 10/100/1000 RJ45 Port Two Multimode Fiber Ports - 1000 Mbps |
ET-9RG-SS Six 10/100 RJ45 Ports One 10/100/1000 RJ45 Ports Two Singlemode Fiber Ports - 1000 Mbps |