Industrial Connectivity

Industrial Connectivity

A UPS claims to protect your computer from power line surges, but is it fully protected? Surges striking another Ethernet device can easily travel through network cabling to threaten your expensive computer, or worse - your irreplaceable data. If your network connects devices in different areas of your building, chances are multiple power systems supply your equipment. This means the potential for ground loops and other classic instrumentation faults is ever present. The solution is simple - install Sixnet's inexpensive SP-ETH-2 surge suppressor on each Ethernet port.

Overview
Specs
Order Guide
Downloads

10/100BaseT(x) Ethernet Surge & Lightning Protector

Advanced 3 stage hybrid protection
Dual port – protects two Ethernet devices
Save money on repair and replacement
Modular and compact design
DIN-rail or direct-panel mounting
Protective grounding to DIN-rail
UL and CE rated for industrial use
Compatible with Sixnet’s Industrial Ethernet Switches

Performance Specifications

Technology: high energy metal oxide varistors (MOVs) with a double network of ultra-fast diodes and silicon avalanche diodes
Usage: 10BaseT or 100BaseTx
Ports protected: 2 (4 lines per port)
Connectors: RJ45 (pins 1, 2, 3, 6)
Surge capacity: 1 kA / line
Clamp and rated: 10 V and 5 V
Max. frequency: 155 MHz
Operating temp.: -40 to 85°C
Attenuation: better than -0.3 dB at 100 MHz
N.E.X.T.: better than -43 dB at 100 MHz
Ratings: UL 497B, EIA / TIA (TSB 40A)

Part Number	Description
SP-ETH-2	Dual-port surge protector (1 piece pack)
SP-ETH-2-5	Dual-port surge protector (5 piece pack)

Note: Each surge protector is supplied with a grounding kit for direct panel mounting and two 4 ft. Ethernet patch cables (cat. 5).

Industrial Networking - Sixnet Solutions

PRODUCTS

Dual Port Fast Ethernet Protector