Industrial Switch Product Highlights

• Slim 5 port DIN-rail packaging
• 4 PoE sourcing ports with full IEEE compliance
• Pre-configured for plug-and-play simplicity
• Industrial-hardened design

IEEE 802.3af Compliant PoE Ports

• Power Sourcing Equipment (PSE) operation
•  Auto-detection of PD (powered devices)
• Over-temperature and over-current detection
• Over and under-voltage detection

• Intelligent message routing (no collisions)
• Supports all standard IEEE 802.3 protocols

• Auto-sensing for speed and duplex
•  Auto-mdi / mdix-crossover and auto-polarity
• Automatic PoE power management

• Truly industrial -40 to 75°C operation
•  Dual power inputs with surge protection
• DIN-rail or direct panel mounting
  
  

 Ethernet Performance

• Operation: unmanaged, store and forward, wire-speed switching, non-blocking
• Modes: full or half duplex operation with flow control supported on all ports
• Support: all IEEE 802.3 compliant devices and protocols are supported
• Ethernet compliance
  • IEEE 802.3af (Power over Ethernet)
  • IEEE 802.3 (10Mbps Ethernet for legacy devices)
  • IEEE 802.3u (100Mbps Ethernet for newer devices)
  • IEEE 802.3x (Full-Duplex with Flow Control)
• MAC addresses: 1024
• Memory bandwidth: 3.2 Gbps
• Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
• Ethernet isolation: 1500 Vrms 1 minute

• RJ45 ports: Up to five RJ45 ports that are fully IEEE 802.3 compliant; four of these are PoE (PSE) and fully 802.3af compliant
• RJ45 speed and duplex: 10/100 auto-detecting for speed and duplex (full or half)
• RJ45 MDI / MDIX: Auto-mdi / mdix-crossover automatically supports either straight or crossed cables
• RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs

• One optional 100 Mbps fiber optic port for distances up to 120km
• Transceivers: SC or ST style
• Multimode: Links up to 4 km typical; 1310 nm; use with 50 or 62.5/125 um fiber
  • Transmitter power (dB): -21 min, -17 typ, -14 max
  • Receiver sensitivity (dB): -34 typ, -31 max
• Singlemode: Links up to 20 km typical; 1310 nm; use with 9 or 10/125 um fiber
  • Transmitter power (dB): -15 min, -11 typ, -8 max
  • Receiver sensitivity (dB): -36 typ, -31 max
• Singlemode Long Haul: Links up to 40 km typical; 1310 nm; use with 9 or 10/125 um fiber
  • Transmitter power (dB): -5 min, -3 typ, -0 max (special order)
  • Receiver sensitivity (dB): -36 typ, -34 max (special order)
• Longer distances: Contact Sixnet for distances up to 120 km
• Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11

• Redundancy: Dual power input terminals with reverse polarity protection
• Power input: 10-30 VDC with no PoE output; 45-56 VDC for PoE output
• Switch Power Consumption 
  • 2.0 W (5-port without fiber) + PoE
  • 3.0 W (5-port with 1 fiber) + PoE
  • Typical for all ports to be active at 100 Mbps
• PoE Power consumption: Up to 15.4 W per port
• Transient protection: 15,000 watts peak
• Spike protection: 5,000 watts (10 times for 10 uS)

• PoE compliance: 100% IEEE 802.3af compliant
• PoE classification: PSE (Power Sourcing Equipment)
• PoE voltage: 45 to 48 VDC depending on power input
• PoE power: Up to 15.4 watts per channel
• PoE RJ45: pin assignments TX/V- (3, 6); RX/V+ (1, 2)
• PoE operation: automatic detection and power management
• PoE disconnect mode: DC disconnect
• PoE protection: over-temperature, over-current, over/under-voltage and transient

• Operating temperature: -40 to 75°C (cold startup @ -40)
• Storage temperature: -40 to 85°C
• Humidity: 5 to 95% RH (non-condensing)
• Vibration: IEC68-2-6
• Shock: IEC68-2-27
• Freefall: IEC68-2-32

• Electrical safety: UL508 / CSA C22.2/14 per CUL; EN61010-1
• EMC: FCC part 15 / ICES-003; EN55022 / IEC61326-1
• Hazardous locations: UL1604, CSA C22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); ATEX / Cenelec (Zone 2)
• MTBF Mean Time Between Failure: >1,000,000 hours
• RoHS and WEEE: RoHS (Pb free) and WEEE compliant
• ISO9001:2000: Certified "Total Quality" company
• Industrial Warranty: 5 years with product registration

• Slim line case, ideal for DIN-rail mounting
• Material: Corrosion-proof polycarbonate plastic
• Protection: IP30 protection from dust and debris
• DIN-rail or direct-panel mounting (no optional kits or accessories required)
• Dimensions: 1.0" x 4" x 3.3" (2.5 x 10.0 x 8.3 cm)
• Weight: 4 oz. (0.11 kg)

• EB-5ES-PSE Datasheet
• Fiber SC-ST Datasheet
• EB-xxx User Manual
• EB-5ES-PSE (.gif) Drawing
• EB-5ES-PSE (.dwg) Drawing