Industrial Switch Product Highlights
To learn more about our ET-5MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
Just add your own packaging, power supply and connectors and you have your own custom industrial Ethernet switch.
ET-5MS-OEM Industrial Ethernet Switch
Board-Level Industrial Connectivity
The ET-5MS-OEM is a 6 port managed industrial Ethernet switch designed for OEM-embedded applications. This powerful board-level solution enables organizations to save time and money by private labeling state-of-the-art industrial switches.
Board-level solution for embedded applications
6 ports – including one MII – for flexible interfacing
4 10/100 PHYs and magnetics on board
Extra output lines to drive external LEDs
Low power consumption of less than 2 watts
Compact 3.5 x 2.5” (8.9 x 6.4 cm) design
Real-Time Ethernet Performance
-
Fast wire-speed switching
-
Intelligent message routing - no collisions
-
Real-time Ring® and Rapid Spanning Tree (RSTP) for fast redundant ring or mesh connections
-
SNMPv1 and v2 network management
-
SNMPv3 authentication and encryption for security
-
SNMP notifications (traps) for report on event
-
Priority Queuing (QoS/CoS) for real-time operation
-
IGMP for multicast filtering (snooping and querying)
-
VLAN for convenient traffic segregation
-
Broadcast and multicast storm protection
-
RMON and port mirroring for advanced diagnostics
-
Security with HTTPS, SSL, SSH, SNMPv3 and more
-
Easy to use interfaces: web, CLI or Telnet
-
Free firmware upgrades forever
Trouble-Free Operation
-
Ultra-reliable 1,000,000+ hours MTBF
-
UL/CSA (CUL), CE and hazardous locations (Zone 2) rated
-
-40 to 75°C operating range
-
Self-test/alarm output signal
To learn more about our ET-5MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
Ethernet Performance
-
Fully managed with 6 Ethernet ports
-
Store and forward, wire-speed switching
-
Automatic address learning, aging and migration
-
Full duplex operation with flow control (no collisions)
-
All IEEE 802.3 Ethernet protocols supported
-
2048 MAC addresses supported
-
Memory bandwidth: 3.2 Gbps
-
Typical latency (varies on load)
-
@ 100 Mbps: 5 µs + frame time
-
@ 10 Mbps: 16 µs + frame time
-
-
Ethernet isolation: 1500 VRMS 1 minute
Ethernet Ports
-
6 fast (10/100) Ethernet ports total
-
4 with on-board PHYs and magnetics; these are available through board-to-board or ribbon connector
-
1 with on board PHY (by requires external magnetics); available through board-to-board connector
-
1 is an MII port for interface to an external CPU or PHY or fiber optic transceiver; available through board-to-board connector
-
-
Ports support plug and play operation
-
Auto-negotiation for 10 or 100 Mbps
-
Auto- MDI/MDIX-crossover for any either cable type
-
Auto-polarity corrects for crossed +/- signals
-
Ethernet Compliance
-
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
-
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
-
IEEE 802.3x (Full-Duplex with Flow Control)
-
IEEE 802.1D/w, 802.1p, 802.1Q and much more
Power Input
-
Power input voltage: 3.3 VDC (regulated)
-
Input power (typical - all ports active at 100 Mbps): <1.65 W (<500 mA @ 3.3 VDC)
Environmental
-
Operating temperature: -40 to 75°C (cold start-up at -40) with proper heat-sinking
-
Storage temperature: -40 to 85°C
-
Humidity: (non-condensing) 5 to 95% RH
-
Vibration and shock: IEC68-2-6, -2-27 and -2-32 with proper mounting
Standards & Compliance
-
Electrical safety: UL508/CSA C22/14, EN61010-1, CE
-
EMC: FCC part 15, ICES-003, EN55022, EN610006-2/4, CE
-
Hazardous Locations: UL1604/CSA C22.2/213 (Class I, Division 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
-
RoHS and WEEE compliant
-
ISO9001:2008 certified company
All specifications are subject to change. Contact Sixnet to learn more.
To learn more about our ET-5MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
| Part Number | Description |
| ET-5MS-OEM-2-1 |
Industrial OEM switch with only Molex connectors*
(for board-to-board and ribbon interfaces) |
| ET-5MS-OEM-2-1B** |
Industrial OEM switch with Samtec connectors
(2 for board-to-board connections) plus Molex ribbon interface* |
A test fixture is also available. Contact Sixnet for details.
* Reference mechanical diagram for location of connectors.
** Recommended for all new designs
To learn more about our ET-5MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
To learn more about our ET-5MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
- ET-5MS-OEM Datasheet
- Managed Switch Software User Manual
- Subway Transportation Application Brief
- Firmware: Revision History
- Firmware: Upgrade Guide
- Firmware: Managed Switch v5.0.138
- Software: Switch Utility (Firmware Loader)
- Software Data: SNMB MIB File
- Software: USB Driver
- ET-5MS-OEM (gif) Drawing
- ET-5MS-OEM (dwg) Drawing
Industrial Ethernet Switch Software & Firmware Downloads
- New Firmware Releases
- Legacy Firmware
- Revision History
- Firmware Loader
- USB Driver
- SNMP MIB File
To learn more about our ET-5MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.