Industrial Switch Product Highlights

• Board-level design for embedded applications
• 10 ports - including one MII - for flexible interfacing
• 8 10/100 PHYs and magnetics on board
• 2 Gigabit available through external PHYs
• Board-to-board or board-to-wire connections
• Extra output lines to drive external LEDs
• Compact 3.55 x 3.78” (9.0 x 9.6 cm) design
• -40 to 75°C operating range

To learn more about our ET-8MS-OEM Industrial Ethernet Switch, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.

Real-Time Secure Performance

• Fast wire-speed switching
• Intelligent message routing - no collisions
• Real-Time Ring™ and Rapid Spanning Tree (RSTP) for fast redundant ring or mesh connections
• SNMPv1 and v2 network management
• SNMPv3 authentication and encryption for security
• SNMP notifications (traps) for report on event
• Priority Queuing (QoS/CoS) for real-time operation
• IGMP for Multicast filtering (snooping and querying)
• VLAN for convenient traffic segregation
• Open-source programming for ultimate flexibility
• Broadcast and multicast storm protection
• RMON and port mirroring for advanced diagnostics
• Security with HTTPS, SSL, SSH, SNMPv3 and more
• Easy to use interfaces: web, CLI or Telnet
• Free firmware upgrades forever

Ethernet Performance

• Managed industrial switch
• Store and forward, wire-speed switching
• Automatic address learning, aging and migration
• Full duplex operation with flow control (no collisions)
• All IEEE 802.3 Ethernet protocols supported
• 8192 MAC addresses supported
• Memory bandwidth: 32 Gbps
• Typical latency (varies on load):
  • @ 100 Mbps: 5 µs + frame time
  • @ 10 Mbps: 16 µs + frame time
• Ethernet isolation 1500 VRMS 1 minute

• 10 possible Ethernet ports total
  • 8 fast Ethernet with on-board PHYs and magnetics; available through board-to-board or wire connectors
  • 2 Gigabit Ethernet (require external PHYs and magnetics); available through board-to-board connector
  • 1 MII port (shared with 1 Gigabit port above) for interface to an external CPU or PHY or fiber optic transceiver; available through board-to-board connector
• Ports support plug and play operation
  • Auto-negotiation for 10 or 100 Mbps
  • Auto-MDI/MDIX-crossover for either cable type
  • Auto-polarity corrects for crossed +/- signals

• IEEE 802.3 (10Mbps Ethernet supports legacy devices)
• IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
• IEEE 802.3z (Gigabit Ethernet 1000Mbps)
• IEEE 802.3x (Full-Duplex with Flow Control)
• IEEE 802.1D/w, 802.1p, 802.1Q and much more

• Power input voltage: 3.3 or 5.0 VDC (regulated)
• Input power (typ. 8 ports active at 100 Mbps): 4 W

• Operating temperature: -40 to 75°C (cold startup at -40) with proper heat-sinking 
• Storage temperature: -40 to 85°C
• Humidity (non-condensing): 5 to 95% RH
• Vibration and shock: IEC68-2-6, -2-27 and -2-32 with proper mounting 

• Electrical safety: EN61010-1, CE 
• EMC: FCC part 15, ICES-003; EN61000-6-2/4, CE 
• RoHS and WEEE compliant
• ISO9001:2008 certified company 

• Weight: 4 oz. (0.11 kg)
• Dimensions: 3.55 x 3.78” (9.0 x 9.6 cm)

• ET-8MS-OEM Datasheet
• Managed Switch Software User Manual
• Firmware: Managed Switch v5.0.138
• Firmware: Revision History
• Firmware: Upgrade Guide
• Software: Switch Utility (Firmware Loader)
• Software Data: SNMB MIB File
• Software: USB Driver
• ET-8MS-OEM (gif) Drawing
• ET-8MS-OEM (dwg) Drawing

Industrial Ethernet Switch Software & Firmware Downloads

• New Firmware Releases
• Legacy Firmware
• Revision History
• Firmware Loader
• USB Driver
• SNMP MIB File