The Micro-VersaTRAK µIPm™ (Micro-IPm) is the ideal plant-floor interface for data-oriented applications such as RF and bar code tag systems. This Linux open-source platform is adapted to database applications. SIXNET's optional Sixlog software records transactions, events and trend data. It includes abundant communication ports and I/O to complete the application. The Micro-IPm is also the expandable, programmable RemoteLog datalogger that you have been looking for.
WHERE TO USE THE MICRO IPm?
- Ideal for ID tag applications, serial ports link to code readers
- Datalogging and timestamping trending, alarm logging, & transaction recording
- Stand alone control of remote sites, IEC 61131 ISaGRAF and also C++ programming via open source Linux
- Limitless multi-user connectivity telephone, Internet, and wireless telemetry, 10/100 Ethernet plus up to 4 com ports
- Embedded Linux open source software, add applications, I/O drivers & much more
- An OEM’s dream platform, pre-certified, add your application
- Built-in I/O - 8 DI, 4 DO & 2 AI (optional)
- Expandable up to 256 I/O per type with EtherTRAK and RemoteTRAK I/O (see note about SixTRAK I/O)
- DIN rail or direct panel mounted
- Flexible open-source LINUX software
- + Ideal for database applications
- Powerful C/C++ programming
- ISaGRAF IEC 61131 programming
- Datalogging & alarming
- Peer to peer I/O transfer capability
- IPm Add-on applications
- + AGA, DNP3, SNMP, PPP, Hart & more
- Other automation and control features
- Advanced security capabilities
- Up to 5 com ports (1 Ethernet and 4 serial)
- Limitless multi-user connectivity supports Internet, telephone, wireless & more
- Modbus TCPIP, UDP, ASCII, & RTU
- Advanced communications capabilities
- -40 to +70°C operating temperature
- UL, CSA, CE, DNV, & Zone 2 rated
PERFORMANCE SPECIFICATIONS
- Industrial PowerPC (32 bit data bus)
- Operating system embedded open-source Linux
- Dynamic memory (RAM) 16 Mbytes for program execution, dynamic variables, dynamic file system, etc.
- Program memory (Flash) 16 Mbytes for Linux OS, program storage and file system
- Retained memory (RAM) 512K (battery-backed) for datalogging and retained variables
- Real-time clock battery-backed for time stamping and other operations
- Local I/O (on-board) 12 or 14 (see ordering info.)
- I/O Expansion (up to 256) RS485 or Ethernet
- Datalogging support
- IEC 61131 programming, ISaGRAF for ladder logic, SFC, flow charting and more (6 languages supported)
- High Level C programming
- 10/100BaseTx (auto-detecting)
- RJ45 connection (auto-crossover)
- Protocols TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, SIXNET, optionally PPP, DNP3 and more
- Up to 115,200 baud
- RS485 Port A screws (485+, 485-, GND) (2-wire half-duplex)
- RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
- RS232 Port C Screws (TD, RD, RTS, GND)
- RS232 Port D (optional) Screws (TD, RD, GND) – In place of the two analog inputs
- Protocols Master & slave modes; SIXNET & Modbus RTU/ASCII; Others available as Linux applications
- 8 channels sourcing or sinking (jumper/software selectable)
- Guaranteed ON voltage 9 VDC (The threshold is factory adjustable to turn on at a lower voltage – contact SIXNET)
- Maximum voltage 30 VDC
- Guaranteed OFF voltage 5.0 VDC & 1.5 mA DC
- Input resistance & current 10K Ohms and 3 mA @ 24 VDC
- Filtered ON/OFF delay 25 mS (20 Hz max. counting) for contact bounce filtering
- Fast ON/OFF delay 4 mS (100 Hz max. counting)
- Count rate (see above) (10 KHz on channel 1 only)
- Counter modes pulse, rate and run time
- Poll time (all channels) 5 mS to 20 mS configuration dependent
- 4 channels – sourcing 10-30 VDC
- Min. & max. output load 1 mA to 1 Amp sourcing per channel
- Max. OFF state leakage 0.05 mA
- Inrush current 5 Amps (100 mS surge)
- Typical ON characteristics 0.3 Ohms resistance and 0.3 VDC voltage drop @ 1A
- Poll time (all channels) 5 mS to 20 mS configuration dependent
- 2 channels – current or voltage selectable
- Full scale range 4-20 mA or 0-5 VDC (jumper selectable)
- A/D and input resolution 16 bits (0.003%); 2 uA (current range) or 0.5 mV (voltage range)
- Full scale accuracy +/-0.1% (@20°C) (factory calibration)
- Span & offset temp. coeff. +/-50 ppm per °C
- Input impedance 100 Ohm (current range), 80 K Ohm voltage
- Current protection Self-resetting fuses (for 4-20 mA range)
- DMRR 66 dB at 50/60 Hz (differential mode rejection)
- Fastest update time 50 mS (both channels) – configurable for longer integration times for better noise filtering
- DIN rail or flat panel mount
- Input power 10-30 VDC
- Input current 100 mA @ 24 VDC (typical)
- Temperature -40 to 70°C (-40 to 85°C storage)
- Humidity 5% to 95% RH (non-condensing)
- Flammability UL 94V-0 materials
- Electrical safety UL 508, CSA C22.2/14; EN610101; (IEC1010)
- EMI emissions FCC part 15, ICES-003, Class A; EN55022; EN61326-1
- EMC immunity EN61326-1 (EN61000-4-2,3,4,6)
- Surge withstand IEEE-472 (ANSI C37.90)
- Vibration IEC68-2-6
- Hazardous locations (Class 1, Div 2, Groups A,B,C,D) UL 1604, CSA C22.2/213, Cenelec EN50021 Zone 2
- Tested to Marine/offshore standards
EtherTRAK: The original Ethernet I/O modules that provide a easy to add I/O to any network
8, 10-30VDC discrete inputs, field wiring
How Much Datalogged Information Can be Stored?
Each Sixlog file is allocated a fixed amount of memory. Each record typically contains a time stamp (4 bytes), analog values (2 bytes each), and discrete values (8 per byte). The size of the record is automatically computed and displayed for you by the Sixlog software. The overall storage time (until the oldest data in a full file is overwritten by new data) is computed as:
Longest storage = (file size) x (capture interval) / (bytes per record)
Example:
- 16 analog values plus a time stamp ( 32 + 4 = 36 bytes) are logged every 5 minutes into a 400K file.
- Oldest data = 400,000 (approx) x 5 minutes / 36 bytes/record = 55,555 Minutes (38 days)
By default, the Micro-VersaTRAK µIPm has more than 400K for datalogging.
Adding I/O to a Micro-VersaTRAK µIPm
Any combination of EtherTRAK and RemoteTRAK I/O modules can be connected to a Micro-VersaTRAK µIPm. A single Micro-VersaTRAK µIPm supports up to 256 EtherTRAK and/or RemoteTRAK I/O.
Why Micro-VersaTRAK µIPm Instead of other SIXNET Controllers?
- Micro-VersaTRAK µIPm offers built-in I/O, Ethernet and up to four serial ports.
- The embedded LINUX operating system in the Micro-VersaTRAK µIPm offers greater programming flexibility and performance than the legacy VersaTRAK / Mini-VersaTRAK RTUs.
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||