Though it is built on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX without any extra effort. The SixTRAK IPm is 100% compatible with Sixnet's legacy SixTRAK Gateways. All existing ISaGRAF user programs will load and run in an IPm without any changes.
Industrial RTU Product Highlights
- Process Control, SCADA and DCS
- A modular and scalable industrial automation solution
- Your choice of open programming
- IEC 61131 open and high-level C++ programming
- Limitless multi-user connectivity
- Telephone, internet, and wireless telemetry
- Dual Ethernet networks
- Two unique IP addresses for redundant networking
- Advanced industrial capabilities
- Redundancy, datalogging, peer-to-peer links
- True open system design
- Ethernet TCP, Modbus, LINUX, OPC and more
- Small to large applications
- Scalable from 1 to 1,000+ stations
- Unlimited I/O module expansion
- Grow from a few points to more than 50,000
- Embedded LINUX open-source software
- Web servers, custom com drivers and much more
- An OEM’s dream platform
- Add your own LINUX applications
To learn more about our SixTRAK IPm Industrial RTU, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
Performance Specifications
- Industrial PowerPC (32 bit data bus)
- Operating system: embedded LINUX
- Dynamic memory (RAM): 16+ Megabytes - 32bit; 0 wait states
- Program memory (Flash): 16+ Megabytes
- Datalogging memory (RAM): 512K or 2 MB (battery-backed)
- Maximum local I/O: 640
- Maximum distributed I/O: 50,000+ (application dependent)
- Datalogging support: Sixnet Sixlog
- IEC 61131 programming: Sixnet ISaGRAF
- High Level C programming: LINUX open software
Ethernet Ports (All)
- 10/100BaseTx (auto-detecting)
- Connection: RJ45 (auto-crossover)
- Protocols: TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, Sixnet and more
- Independent networks: 2 w/ unique MAC and IP addresses
- Network port 1: (1) shielded RJ45 connector
- Network port 2: (4) shielded RJ45 connectors (linked via integrated industrial Ethernet switch)
Serial Port
- Up to 115,200 baud
- RS232 Port A RJ45 (TD, RD, CTS, RTS, CD,TR, DSR, GND)
- RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
- RS485 Port C Screws (485+, 485-, GND) (2-wire half-duplex)
- Protocols (master or slave): Sixnet and Modbus RTU/ASCII; many others available in LINUX
- Flow control - hardware, software, half/full-duplex modem
Environmental
- DIN-rail or flat-panel mount
- Input power: 10-30 VDC
- Input current: 150 mA @ 24 VDC (typical)
- Temperature: -40 to 70°C (-40 to 85°C storage)
- Humidity: 5% to 95% RH (non-condensing)
- Flammability: UL 94V-0 materials
- Electrical Safety: UL 508, CSA C22.2/14; EN61010-1 (IEC1010); CE
- EMI emissions: FCC part 15, ICES-003, Class A; EN55022; EN61326-1; CE
- EMC immunity: EN61326-1 (EN61000-4-2,3,4,6); CE
- Vibration: IEC68-2-6
-
Hazardous locations: UL 1604, CSA C22.2/213, (Class 1, Div 2, Groups A,B,C,D) Cenelec EN50021 Zone 2
-
MTBF ST-IPm-6350: 2,003,287 Hours GB @ 40°C per MIL-HNDBK-217F2
- Marine/offshore tested and/or verified to meet various marine and maritime standards
All specifications are subject to change. Contact Sixnet to learn more.
To learn more about our SixTRAK IPm Industrial RTU, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
How Much Datalogged Information Can be Stored?
Each Sixlog file is allocated a fixed amount of memory. Each record typically contains a time stamp (4 bytes), analog values (2 bytes each), and discrete values (8 per byte). The size of the record is automatically computed and displayed for you by the Sixlog software. The overall storage time (until the oldest data in a full file is overwritten by new data) is computed as: Longest storage = (file size) x (capture interval) / (bytes per record)
Example:
-
16 analog values plus a time stamp ( 32 + 4 = 36 bytes) are logged every 5 minutes into a 400K file.
-
Oldest data = 400,000 (approx) x 5 minutes / 36 bytes/record = 55,555 Minutes (38 days)
* SixTRAK IPms come with 512KB and 2MB datalogging options
Why SixTRAK IPm Instead of other Sixnet Controllers?
- SixTRAK IPm offers more communication ports (RS232 and Ethernet) than are available on other Sixnet gateways and industrial RTUs.
- The embedded LINUX operating system in the SixTRAK IPm offers greater programming flexibility and performance than the legacy VersaTRAK / Mini-VersaTRAK industrial RTUs.
To learn more about our SixTRAK IPm Industrial RTU, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.
| Recommended RTUs |
|
|
RS232 |
RS485 |
Eth |
|
|
|
|
ST-IPM-6350* |
2 |
1 |
5
|
2 MB |
64MB |
128MB |
|
|
3 |
1 |
1 |
512K |
16MB |
16MB |
*Best Value
Legacy RTUs
End of Life Notice
Last-time buy date is September 30, 2011
Spares and replacements will be available through March 28, 2014 |
|
|
RS232 |
RS485 |
Eth |
|
|
|
|
ST-IPM-1350 |
2 |
1 |
5 |
512K |
16MB |
16MB |
|
ST-IPM-2350 |
2
|
1 |
5 |
|
|
|
|
|
3 |
1 |
1 |
2 MB |
16MB |
16MB |
Legacy Controllers
End of Life Notice
Last-time buy date is December 31, 2011
Spares and replacements will be available through March 28, 2014 |
|
Part Number |
RS232 |
RS485 |
Eth |
|
|
|
| ST-GT-1210 |
1 |
1
|
1
|
512K
|
16MB
|
16MB |
| ET-GT-ST-3 |
1 |
0 |
2 |
- |
- |
-* |
*Memory is not applicable because unit is not programmable.
| Replacement Guide: |
|
Legacy |
Replacement |
ST-IPm-1350
|
ST-IPm-635 |
ST-IPm-2350
|
ST-IPm-635 |
VT-IPm-2410
|
ST-IPm-6350 or VT-IPm-1410 |
VT-MIPm-131-D
|
VT-MIPm-135-D |
VT-MIPm-241-D
|
VT-MIPm-245D |
| ST-GT-1210 |
ST-IPm-6350 or VT-IPm2m-113 |
| ET-GT-ST-3 |
ST-IPm-6350 or VT-IPm2m-113 |
To learn more about our SixTRAK IPm Industrial RTU, simply contact sales@sixnet.com, call +1 518 877 5173 or request an industrial networking product CD now.