Industrial Switch Product Highlights
-
10 ports including
-
7 fast Ethernet 10/100 RJ45 ports
-
1 Gigabit Ethernet 10/100/1000 RJ45 port
-
2 Gigabit combo ports for copper or fiber
-
High port count in a small footprint
-
Truly rugged design with -40 to 75°C operation
-
Easy to configure management functions
Two Flexible Combination Gigabit Ports
Your choice, either connect to the RJ45 for a 10 /100 /1000 Mbps auto-detecting copper link or plug in a fiber transceiver for a 100 or 1000Mbps noise-immune fiber link. These advanced ports give you the flexibility you need and make your job easier!
Real-Time Secure Performance
Trouble-Free Operation
Ethernet Performance
- 10 Ethernet ports including 3 Gigabit
- Managed, store and forward, wire-speed
- All IEEE 802.3 Ethernet protocols supported
- RJ45 ports 1 - 7 (shielded) 10/100BaseTX
- RJ45 ports 8 - 10 (shielded) 10/100/1000BaseTX
- RJ45 port speed auto-negotiation
- RJ45 MDI/MDIX auto-crossover
- RJ45 TD and RD auto-polarity
- Ports 9 and 10 are combination gigabit ports that have both a RJ45 connector and SFP fiber connector. For each of these ports, only one of the connectors can be used at a time.
- SFP (pluggable) ports 9 - 10 accept mini-GBIC transceivers
- Fiber optic port speed: 100 Mbps or 1000 Mbps
- Fiber typical specs (see separate datasheet for details)
- Multimode, 0.55 km, 850 nm, 50-62.5/125 µm
- Singlemode, 10 km, 1310 nm, 9-10/125 µm
- Long haul, up to 120+ km, 1550 nm, 9-10/125 µm
- Typical latency (varies on load and settings)
- @ 10 Mbps: 16 us + frame time
- @ 100 Mbps: 5 us + frame time
- Full or half duplex operation configurable per port
- MAC addresses supported 8192
- Memory bandwidth 32 Gbps
- Ethernet isolation 1500 VRMS 1 minute
- Console ports – USB and RS232 (RJ45)
Ethernet Compliance
- IEEE 802.3z (Gigabit 1000 Mbps Ethernet connections)
- IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
- IEEE 802.3 (10Mbps Ethernet supports legacy devices)
- IEEE 802.3x (Full-Duplex with Flow Control)
- IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability)
- IEEE 802.1p (Priority Queuing – QoS, CoS, ToS / DS)
- IEEE 802.1Q (VLAN for traffic segregation)
Real-Time Ring™
- Link loss recovery: 30 mS plus 5 mS per hop
- Switches in a ring: <50 for best performance
- Multiple rings supported (configurable)
“OK” Alarm Output
- Indicates power and operational status
- Voltage same as switch input voltage
- Maximum current output 0.5 Amp
Power Input
- Redundant input terminals
- Reverse polarity protection
- Input power (typical with all ports active)
- 5 W (w/ no fiber plugged in)
- 7 W (w/ 2 fiber plugged in)
- Power input voltage 10-30 VDC
- Transient protection 15,000 watts peak
- Spike protection 5,000 watts (10x for 10 uS)
Environmental
- Operating temperature:
- -40 to 75 °C (cold startup at -40 °C)
- Storage temperature -40 to 85 °C
- Humidity (non-condensing) 5 to 95% RH (optional conformal coating is available)
- Vibration and shock – IEC60068-2-6, -27, -32
Standards & Compliance
- Electrical safety – UL508/CSA C22.2/14; EN61010-1, CE
- EMC – FCC part 15, ICES-003; EN61000-6-2/4, CE
- Hazardous locations – UL1604/CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
- Maritime – designed for marine and offshore per ABS
- NEMA TS-2 for traffic control systems
- RoHS and WEEE compliant
- ISO9001:2008 certified company
Physical
- DIN-rail or direct-panel mounting
- Case – Corrosion-resistant aluminum
- Ingress protection – IP40
- Weight – 0.34 kg (12 oz.)
- Dimensions – see mechanical diagram
All specifications are subject to change. Contact Sixnet to learn more.
Industrial Ethernet Switch Software & Firmware Downloads
- New Firmware Releases
- Legacy Firmware
- Revision History
- Firmware Loader
- USB Driver
-
SNMP MIB File
