The Ultimate RTU with the Power of Completely Open LINUX Software
The VersaTRAK IPm™ is the ultimate open Remote Terminal Unit. This versatile RTU is loaded with powerful communications and advanced programming capabilities. Though it is built-on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX with no extra effort. The VersaTRAK IPm™ is 100% compatible with SIXNET's legacy VersaTRAK RTU. All existing ISaGRAF user programs will load and run in an IPm™ without any changes
The VersaTRAK IPm™ is the ultimate open Remote Terminal Unit. This versatile RTU is loaded with powerful communications and advanced programming capabilities. Though it is built-on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX with no extra effort. The VersaTRAK IPm™ is 100% compatible with SIXNET's legacy VersaTRAK RTU. All existing ISaGRAF user programs will load and run in an IPm™ without any changes
PRODUCT HIGHLIGHTS
- Stand alone control of remote sites
- Flexible Open-source LINUX software
- IPm Add-on Software
- Embedded LINUX firmware
- Datalogging & timestamping
- Datalog Server
- Redundant Logging
- Never lose data again!
- ISaGRAF IEC 61131 programming
- Limitless multi-user connectivity
- Advanced communications
- DNP3, SNMP, PPP, Hart & more
- Modbus/TCP, ASCII, & RTU
- Advanced security capabilities
- True open system design
- Unlimited I/O expansion
- Peer to peer I/O transfer capability
- Master terminal unit / concentrator
- UL, CSA, CE, DNV, & Zone 2 rated
PERFORMANCE SPECIFICATIONS
-
Industrial PowerPC (32 bit data bus)
- Operating system Embedded LINUX
- Dynamic memory (RAM) 16 Megabytes – 32bit, 0 wait states
- Program memory (Flash) 16 Megabytes
- Datalogging memory (RAM) 512K or 2 MB (battery-backed)
- Maximum local I/O 640
- Maximum distributed I/O 50,000+ (application dependent)
- Datalogging support – SIXNET Sixlog
- IEC 61131 programming – SIXNET ISaGRAF
- High Level C programming – LINUX open software
- 10/100BaseTx (auto-detecting)
- Connection RJ45 (auto-crossover)
- Protocols TCP/IP, ARP, UDP, ICNP, DHCP,
- Modbus/TCP, SIXNET, and more
- Up to 115,200 baud
- RS232 Port A RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
- RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR, DSR, GND)
- RS485 Port C Screws (485+, 485-, GND) (2-wire half-duplex)
- RS232 Port D Screws (TD, RD, CTS, RTS, GND)
-
Protocols (master & slave) SIXNET & Modbus RTU/ASCII;
many others available in LINUX -
Flow Control Hardware, software, RTS-party
(for radios and RS485)
- DIN rail or flat panel mount
- Input power 10-30 VDC
- Input current 100 mA @ 24 VDC (typical)
- Temperature -40 to 70°C (-40 to 85°C storage)
- Humidity 5% to 95% RH (non-condensing)
- Flammability UL 94V-0 materials
- Electrical Safety UL 508, CSA C22.2/14; EN61010-1 (IEC1010); EMI emissions FCC part 15, ICES-003, Class A; EN55022; EN61326-1;
- EMC immunity EN61326-1 (EN61000-4-2,3,4,6); Surge withstand IEEE-472 (ANSI C37.90)
- Vibration IEC68-2-6
- Hazardous locations UL 1604, CSA C22.2/213, (Class 1, Div 2, Groups A,B,C,D) Cenelec EN50021 Zone 2
Specifications are subject to change. Consult factory for latest information.
Add locally accessible I/O with the SixTRAK I/O modules
|
PART NUMBER (Module with Base) |
I/O Count | DESCRIPTION |
PDF Data Sheet |
|||
|
DI |
AI |
DO |
AO |
|||
|
ST-DI-005-08U or F |
8 |
- |
- |
- |
4-10 VAC/VDC |
|
|
ST-DI-024-08U or F |
8 |
- |
- |
- |
10-32 VAC/VDC |
|
|
ST-DI-048-08U or F |
8 |
- |
- |
- |
32-60 VAC/VDC |
|
|
ST-DI-120-08U or F |
8 |
- |
- |
- |
60-140 VAC/VDC |
|
|
ST-DI-240-08U or F |
8 |
- |
- |
- |
140-265 VAC |
|
|
ST-DI-024-16H |
16 |
- |
- |
- |
10-32 VDC, high density |
|
|
ST-MIX16880-D * |
16 |
8 |
8 |
- |
Combination, double density I/O |
|
|
ST-MIX12884-D * |
12 |
8 |
8 |
4 |
Combination I/O w/4 AO |
|
|
ST-DI-024-32D |
32 |
- |
- |
- |
10-32 VDC, double density |
|
|
ST-DI-CNT-08U |
8 |
- |
- |
- |
4-30VDC, high-speed counters - 50 kHz |
|
|
ST-D0-DC1-08U or F |
- |
- |
8 |
- |
0-60 VDC, 2A/channel |
|
|
ST-D0-DC3-08U or F |
- |
- |
8 |
- |
60-150 VDC, 1A/channel |
|
|
ST-D0-AC1-08U or F |
- |
- |
8 |
- |
16-140 VAC, 2A/channel |
|
|
ST-D0-AC2-08U or F |
- |
- |
8 |
- |
140-265 VAC, 2A/channel |
|
|
ST-DO-DC2-16H |
- |
- |
16 |
- |
10-32 VDC, 0.5 Amps per channel |
|
|
ST-D0-RLY-06U |
- |
- |
6 |
- |
Form C (SPDT), 0-140 VAC/VDC, 2A |
|
|
ST-AI-INS-08U |
- |
8 |
- |
- |
Instrumentation - thermocouples, mV... |
|
|
ST-AI-20M-08F |
- |
8 |
- |
- |
4-20 mA, field wiring ready |
|
|
ST-AI-20M-16H |
- |
16 |
- |
- |
4-20 mA, high density configuration |
|
|
ST-AI-10V-08F |
- |
8 |
- |
- |
+/- 1, 2, 5, 10 volts |
|
|
ST-AI-RTD-06U |
- |
6 |
- |
- |
RTD (100 Ohm platinum), -200 to 850°C |
|
|
ST-AI-RTC-06U |
- |
6 |
- |
- |
RTD (10 Ohm copper), -200 to 260 °C |
|
| ST-AO-10V-08 | -l | 8 | - | - | +/- 1, 2, 5, 10 volts | view |
|
ST-AO-20M-04F |
- |
- |
- |
4 |
4-20 mA (requires 10-30V loop power) |
|
| ST-AO-20M-08F | - | - | - | 8 | 4-20 mA (requires 10-30V loop power) | view |
Selecting the 512K or 2 Megabyte Memory Option
- 512K of datalogging memory can store up to 250,000 analog values
- 2 Megabytes of datalogging memory can store up to 1,000,000 analog values
Each Sixlog file is allocated a fixed amount of memory. Each record typically contains a time stamp (4 bytes), analog values (2 bytes each), and discrete values (8 per byte). The size of the record is automatically computed and displayed for you by the Sixlog software. The overall storage time (until the oldest data in a full file is overwritten by new data) is computed as:
Longest storage = (file size) x (capture interval) / (bytes per record)
Example:
16 analog values plus a time stamp are logged every 5 minutes into a 512K file.
Oldest data = 512,000 (approx) x 5 minutes / 36 bytes /record = 71,111 Minutes (49 days)
By default, the VT-IPM-1410 has more than 400K for datalogging and the VT-IPM-2410 has more than 1.9 Megabytes.
Adding I/O to a VersaTRAK IPm
Any combination of SixTRAK, EtherTRAK and RemoteTRAK I/O modules can be connected to a VersaTRAK IPm. A single VersaTRAK IPm supports up to 1,024 SixTRAK I/O and will interface with up to approximately 50,000 EtherTRAK and/or RemoteTRAK I/O.
Why SixTRAK IPm Instead of other SIXNET Controllers?
|
PART NUMBER |
RS232 | RS485 | Eth |
Static RAM |
Dyn RAM |
Flash |
|
VT-IPM-1410 |
3 |
1 |
1 |
512K | 16MB | 16MB |
|
VT-IPM-2410 |
3 |
1 |
1 |
2 MB | 16MB | 16MB |
|
|
||||||
|
ST-IPM-1350 |
2 |
1 |
5 |
512K |
16MB |
16MB |
|
ST-IPM-2350 |
2 |
1 |
5 |
2 MB |
16MB |
16MB |
|
ST-IPM-6350 |
2 |
1 |
5 |
2 MB |
64MB |
128MB |
|
|
||||||
|
ST-GT-1210 |
1 |
1 |
1 |
512K | 16MB | 16MB |